Item Description
Designed specifically to power the ButtKicker LFE it is full of features designed to make the installation and operation of the ButtKicker easier and more affordable. No preamplifier is required. For home theater, just use a RCA cable to go from your processor's subwoofer out* to the RCA input on the ButtKicker Amplifier. Then, use 12 gauge speaker wire from the amplifier to the ButtKicker. It's as simple as that - plug 'n play. * Use a "Y" connector if your processor has only one sub out. With 1000 watts into 4 ohms and 1900 watts into 2 ohms, the BKA1000-4A is able to power one or two 4 ohm ButtKicker Shakers (when wired in parallel).
Specifications
1000 Watts @ 4 ohms, 1900 Watts @ 2 ohms - will power 2 ButtKicker LFEs wired in parallel , and 4 ButtKicker LFEs used in individual home theater seats.
Class D switching technology
Variable high cutoff, 40 to 160 Hz
Low cutoff, 25 Hz switchable
RCA and ¼” inputs with 160mVolt and 1.25 Volt sensitivities eliminates the need for a separate pre-amplifier
Five way binding post output
See this item for less?
Excellent
Very Good
Good
Fair
Poor
